Multi-Function Portable Shot Blaster Concrete Floor Shot Blasting Machine for Sale

Road-shot blasting machine

Pavement shot blasting machine advantages:
 The road shot blasting machine is a mechanical method to shoot the pellets at high speed and a certain Angle to the surface of the work,Make pill material pounding the pavement surface,so that the pavement surface roughness and removal of residual,the effect of the dust remover,the negative pressure generated will be material and cleaning science under the impurity dust recovery after air cleaning,intact material will be automatically recycled and the impurity and dust can fall into the collection dust box.The huaxing road blasting function once will be enough concrete surface laitance, clean up to remove impurities, and can undertake dozen hair treatment on the surface of concrete, make its surface even rough, greatly improving the adhesive strength of the waterproof layer and concrete base, so that the waterproof layer and bridge deck better combination, and at the same time the crack of concrete can be fully exposed, have the effect of nip in the bud.


Pavement shot blasting machine applications:
1.It is used to improve the roughness and friction coefficient of asphalt pavement, so as to improve the adhesion of the road, so as to ensure the safety of the driving.At the same time, the fixtures on the asphalt pavement (such as fuel, oil, etc.) also have nowhere to run, thus improving the anti-skid performance of the road.
2.Steel deck anti-corrosion coating :
In China, the application of shot blasting technology in steel bridge anti-corrosion coating cannot be denied.Most of the Bridges under construction and has built before the anti-corrosion primer or other spray can choose to use a blast on clean and roughness on the surface of the processing technology, Qingdao across the bay bridge use of shot blasting machine, shot blasting process of steel bridge deck can achieve SA2.5 / SA3 steel cleanliness requirements, and can control the roughness, meet the coating requirements of users, the whole process is dust-free operation, mobile convenience.It's environmentally friendly and convenient.
3.Maintenance of tunnel :
In our country, cement concrete is used in tunnel road surface because of waterproof and material resistance and oil resistance.However, the anti - slip performance of the road surface is also higher.For the above two kinds of problems which are still difficult to solve in our country,Blasting process  is a simple construction, small investment, significant effect and environmental protection.In recent years, with the recommendation of a user to use shot blasting process of bridge and tunnel engineering more and more, in the concrete bridge deck waterproof surfacing, blasting process is already a process specification requirements, the European and American countries are also being gradually accepted in China, all use blasting process was carried out on the concrete pavement maintenance
4.Preventive maintenance of airport runway:
The use of the road-blasting machine is easy and easy to remove the tire track and line of the concrete and asphalt pavement. In addition to the mark (except rubber), removing the calibration line, restoring and increasing the surface roughness of the runway, improving the friction coefficient of the runway is the scope of the road-blasting machine
5.Municipal roads and pavement
All kinds of road pavement in the city can be used for cleaning, shot blasting machine, marking the removal of the road, traffic crossroads, pavement can improve the pavement roughness and galling, friction coefficient.Reduce the problem of road construction.Therefore, the auxiliary effect of road shot blasting machine for urban construction is gradually normalized and convenient for our life.



Pavement shot blasting machine specifications:
Pavement shot blasting machine can adjust the following parameters to meet the requirements of different surface conditions
On different surfaces and different application requirements, the surface after shot blasting needs different treatment effects and requirements and meets different specifications.
1) Choice of shot size: Shot sizes are available in standard shot sizes; steel shots of different diameters can be selected according to the material and roughness of the surface to be treated. The steel surface treatment also requires the addition of a percentage of steel Sand to achieve the required roughness.
2) The walking speed of the shot blasting equipment and the shot blasting material flow rate: The shot blasting equipment can set and adjust the walking speed, and adjust and adjust the flow of the shot material to adjust the shot blast density on the unit surface to realize different throwing Pill effect. With the same flow rate of pellets, the depth of surface cleaning increased with the decrease of processing speed. General shot blasting can be processed in the concrete surface depth of 0.1 ~ 3mm in the asphalt surface can reach the texture depth of 2.5.
3) The structure and strength of grass-roots aggregates with different grass-roots conditions are treated differently under the same shot-blasting parameters. Visible, shot for a different base surface, which by adjusting a variety of control parameters, can achieve different processing results. So it can be applied to almost any surface cleaning needs.










Introduction:
Weifang Huaxing Machinery Co. Ltd. is located in Shandong province Linqu County Road Su Dongcheng Development Zone, covers an area of 33350 square meters, construction area of 16000 square meters, including preparation workshop, assembly workshop, assembly workshop, machining workshop, molding workshop, casting workshop, heat treatment workshop, electrical assembly workshop, a total of eight workshops, a total of a staff of 276 people, engineering design personnel 62 people. The annual output of various cast (spray) pill cleaning machine more than 600 sets; molding sand handling and sand regeneration complete production line 40; various types of shot blasting machine more than 5200 units, special cast iron wear-resistant parts 1100 tons; 600 tons of gray iron ductile iron. It is an industrial entity which integrates development, development, design, production and management. It has formed a professional manufacturer of metal surface cleaning, complete set of equipment for casting machinery and related accessories production.
It is a member of the enterprise management association of China's machinery industry and the "high-tech enterprise" at the provincial level.
Main product:
Series caterpillar shot blasting machine
Series hook type shot blasting machine
Series rotary table shot cleaning machine
Series roller ball cleaning machine
Series trolley passing ball cleaning machine
Series of suspending chain continuous type, hanging chain step type, suspension chain set Throwing Shot cleaning machine.
Series stepping electric hoist ring rail type shot blasting machine
Series steel pipe inner wall and outer wall blasting cleaning machine
Molding complete water production line with resin sand and water glass sand
Complete water production line for recycling of old sand
Sandblasting room, sandblasting machine
Various types of high efficiency Shot Peen
Low chromium, medium chromium, high chromium and ZGMn13 special wear resistant cast iron for all kinds of casting machinery and mining machinery; cast steel, ball cast iron and gray cast iron fittings.
Various environmental type cyclone type, cloth bag type, filter cartridge type dust remover.
And to undertake the design, production, transformation and overhaul of the foundry machinery.
Application:
It is suitable for machinery, auto parts, metal products, decoration parts, household appliances, furniture and other industries. Widely used in the current cleaning equipment of shot blasting, because of the reasonable design, convenient maintenance and low cost, it is highly recommended by the broad masses of customers.



Q: Are you a trading company or a manufacturer?
A:We are factories.

Q: How long is your delivery time?
A: It is generally 5-15 working days if the goods are in stock. Or 15-60 days if the goods are not in           stock, it is based on the quantity and machine model.

Q:What are your terms of payment?
A: Pay 100% down payment < 10000USD > = 10000USD, 30% T / T in advance, balance
     Pre shipment

Q: What's your pre sale service?
A: 1. Advisory support
    2. Technical solutions and quotations
    3. Visit the customer's factory and negotiate.
    4. .customers visit our factory and check the production.
  
Q: How long is the feedback of your company after sale?
A: In 0-24 hours