High Reliability Water Curtain Spray Booth Design

Brief introduction of water curtain spray booth
The water curtain spray painting room of the chamber body, water tank, stainless steel water curtain plate, water system, ventilation filtering systems, at the same time the normal completion of workpiece spraying can effectively prevent the paint waste emissions and pollution of the environment. The water curtain plate structure is advanced and reasonable design, to ensure the indoor air velocity and improve the coating paint paint residue rate and capture rate. And the water layer of uniform, continuous and reliable, without interruption without splashing. The scroll device, the gas water separation baffle can be assembled and disassembled, and the way of disassembly and installation can fully wash and separate residual paint and steam water, so that the environment can be cleaned and conveniently, and the problem of cleaning and preservation of the paint slag can be effectively solved, especially for convenient maintenance.
Spray paint room for the workpiece spraying:
(1) clean working environment;
(2) the paint mist is fully collected. According to the size, shape, weight and production plan of the paint shop, there are many ways: the open and closed ones, the continuous and intermittent ones, the self rotation or the fixed parts, the one side and two sides. In recent years, the oil curtain spray paint room, the lower spray room and so on. The structure should include: air filtration system, the workpiece hanging (transmission, rotation) device, water curtain system, washing system, exhaust system, water tank, lighting device and chamber. Principle: paint spray paint mist recycling recycling can be divided into two parts: one is spraying the workpiece, paint mist and water mixed water will dissolve into collision, some paint mist fall into the trough; two is not dissolved in water mist through the gap at the bottom of the water screen plate into the washing room, fully mixed with the spray nozzle spray water fog. Separation of gas and water flow into the water tank for settlement. Lacquer mist coagulant is regularly added into the sink to form lacquer slag.
Working principle diagram




A. increases the treatment time of paint fog. It can be handled many times before the fan is discharged from the paint mist to the fan, so as to ensure that the treatment is full.
B. increases the chance of throwing the paint mist into the wall or surface of the water under the action of gravity, inertia force and centrifugal force, so that the paint fog is better captured.
C. increases the contact chance between water particles and paint mist, so that paint mist can be fully condensed, or paint mist can be attached to liquid film and air bubbles, or particles will be the core to produce droplet condensation, so as to improve the efficiency of paint mist treatment.
Editors of the development trend of spray painting room
Structure: the structure is simpler, the maintenance is easier and the investment is lower.
Efficiency: the capture efficiency of lacquer fog is higher, and the equipment run uninterrupted for longer.
Environmental protection: the production of waste water, waste gas and solid waste is less.
Operating costs: less energy consuming equipment, lower consumption of water, electricity, and natural gas, and lower integrated operating costs.
Classification and editing of spray painting room
Lacquer room can be generally two categories: dry spray chamber and wet paint room
Dry paint room, as its name implies, because of its separation of paint fog process does not use water, pure dry way to separate paint fog, so called dry spray room.
The wet paint room, as its name implies, uses water as a medium in the process of separating the paint mist. The basic principle is to allow the air and water to be fully mixed with paint fog. The paint mist in the air is washed away by water to separate the air from the paint mist. The way to treat the paint mist in water is to use chemical agents to flocculate the paint mist in the water and recycle the water.





Introduction:
Weifang Huaxing Machinery Co. Ltd. is located in Shandong province Linqu County Road Su Dongcheng Development Zone, covers an area of 33350 square meters, construction area of 16000 square meters, including preparation workshop, assembly workshop, assembly workshop, machining workshop, molding workshop, casting workshop, heat treatment workshop, electrical assembly workshop, a total of eight workshops, a total of a staff of 276 people, engineering design personnel 62 people. The annual output of various cast (spray) pill cleaning machine more than 600 sets; molding sand handling and sand regeneration complete production line 40; various types of shot blasting machine more than 5200 units, special cast iron wear-resistant parts 1100 tons; 600 tons of gray iron ductile iron. It is an industrial entity which integrates development, development, design, production and management. It has formed a professional manufacturer of metal surface cleaning, complete set of equipment for casting machinery and related accessories production.
It is a member of the enterprise management association of China's machinery industry and the "high-tech enterprise" at the provincial level.
Main product:
Series caterpillar shot blasting machine
Series hook type shot blasting machine
Series rotary table shot cleaning machine
Series roller ball cleaning machine
Series trolley passing ball cleaning machine
Series of suspending chain continuous type, hanging chain step type, suspension chain set Throwing Shot cleaning machine.
Series stepping electric hoist ring rail type shot blasting machine
Series steel pipe inner wall and outer wall blasting cleaning machine
Molding complete water production line with resin sand and water glass sand
Complete water production line for recycling of old sand
Sandblasting room, sandblasting machine
Various types of high efficiency Shot Peen
Low chromium, medium chromium, high chromium and ZGMn13 special wear resistant cast iron for all kinds of casting machinery and mining machinery; cast steel, ball cast iron and gray cast iron fittings.
Various environmental type cyclone type, cloth bag type, filter cartridge type dust remover.
And to undertake the design, production, transformation and overhaul of the foundry machinery.
Application:
It is suitable for machinery, auto parts, metal products, decoration parts, household appliances, furniture and other industries. Widely used in the current cleaning equipment of shot blasting, because of the reasonable design, convenient maintenance and low cost, it is highly recommended by the broad masses of customers.

Q:Are yo tu arading company or a manufacturer?
A: We are factories.

Q: What are your terms of payment?
A: Pay 100% down payment < 10000USD > = 10000USD, 30% T / T in advance,                                  sbalance Pre shipment

Q: What's your pre sale service?
A: 1. Advisory support
    2. Technical solutions and quotations
    3. Visit the customer's factory and negotiate.
    4.customers visit our factory and check the production.

Q: How long is the feedback of your company after sale?
A: In 0-24 hours