Environmental pneumatic recovery sand blasting house
The working principle of environment-friendly pneumatic recovery sand blasting house:
The environmental protection pneumatic recovery sandblasting house is a high-tech product developed by our company on the basis of the traditional sandblasting room combined with the latest technology of foreign countries. The blast machine uses air power to automatically recycle and recycle the sand. To avoid the traditional sandblasting room, winch, scraper chain and bucket type lifting machine is easy to wear and maintenance expensive shortcomings, without having to dig a pit, greatly shorten the construction period and cost. Because of the wind recovery fan through the honeycomb type sand suction floor will be blasting (pill) in the dust containing air inhaled into the sand all top-down floor sorting in the cyclone separator; make room form continuous, top-down (roof with a labyrinth air inlet) the circulating gas flow, the dust is always pressed on the bottom of the house body. Greatly enhance the visibility and air quality in the room, improve the working environment of workers.
Internal transportation system: using rail transport type and chain hanger type combined spraying system operation.
Environmental protection type pneumatic recovery sand
blasting house advantages:
1.It saves the spiral conveyor of the conventional sand blasting chamber for conveying coal circulation system. bucket elevator and underground project, no need to build the foundation pit, reduce the construction cost, greatly reduce the project cost;
2. the abrasive recovery rate is high, so it is easy to replace the abrasive.
3.The main electrical components are imported products, with stable performance, safe and reliable, long service life, simple maintenance;
4. The sandblasting chamber has a high visibility in the body, and the natural ventilation of the chamber can save energy consumption.
5.The machine adopts double stage dust removal, the first stage adopts cyclone separator and second stage filter core dust removal system, its total dust removal efficiency is over 99.99%.
6.In the top of the front roof of the sandblasting room, with a "sound and light alarm system", in the sandblasting room, equipped with urgent stop call button;
7. Each system is controlled by interlocking. When one of the systems fails, the system stops working and the spray gun stops ejecting.
8.The real body building decoration design of square steel and sandwich plates, concise and beautiful appearance, good effect of noise reduction, specification, and convenient installation, has the characteristics of wind and rain resistance and corrosion resistance, heat insulation, can be arranged without other plant cover.
Environmental protection type pneumatic recovery sand blasting house product features:
Pneumatic recovery sandblasting room is an environmentally friendly pneumatic recovery sandblasting house developed by our company, which can be designed and manufactured according to the customer's product characteristics and sandblasting requirements. The pneumatic recovery sand blasting room is powered by the wind power of the fan, and the abrasive is sucked into the cyclone separator through the feed pipe, and then separated into the sand blasting system.
Environmental protection pneumatic recovery sandblasting system:
1.Studio
2.Sand blasting system
3.Abrasive recovery system
4.Dust removal system
5.Workpiece conveying system
6.Control system
7.Lighting system
The application field and application scope of environmental protection pneumatic recovery sand blasting house:
Application areas:
The surface treatment of large workpieces and super large parts, such as heavy industrial locomotives, cars, carriages, rack, steel frame assembly and large hardware daily necessities.
Scope of application:
Large castings and forgings, welded steel structures, transformer oil tanks, engineering machinery, locomotive and vehicle, boiler manufacturing, chemical machinery, ship repair and other sand blasting and rust removal.
Technical parameters:
As the size of the room is different and some parameters are different, the parameters are as follows: the size of the room is long * width x high: 12 x 6 x 6m.
The size of the cleaning workpieces of this size is: (9-10) * 3 x (3-4) meters.
Serial
number | Name | Number | Technical specifications | Remarks |
| 1 | Cleaning room | 1 | L×W×H=12000×6000×6000mm(Internal size) | Repair door, manual door |
| 2 | Gas recovery | 1 | 6 tons Separation quantity | 6tons Separation quantity |
| 3 | Shot blasting system | 1 | Model of Shot Peen:Q0250A-II-LX
Shot peening amount:3600-4560kg/h
Sand tank capacity:0.71m³
| Number of spray guns:2branch
Nozzle
diameter:10mm
|
| 4 | Projectile
Sluice gate | 1 | DK28type | Cylinder control switch
|
| 5 | A duster | 1 | Model:HR-24
Ventilation volume:17692m3/h
wind pressure:2202Pa
| Pulse filter cartridge dust collector
Fan power:15KW
|
| 6 | Lighting | 1 | The number of lights:10
| power:10*250W |
| 7 | Total power | 1 | ~54.5KW
| Working voltage:380V/50HZ Operating voltage:220V/50HZ |
| 8 | Theinitialamount of pellets | | 3000Kg | Random non incidental,
buyer'sadditional order |
| 9 | Air consumption | | pressure:0.6-0.8MPa | 13m³/min(Gas source customers) |
| 10 | | | | |
our factory:
our factory:
Introduction:
Weifang Huaxing Machinery Co. Ltd. is located in Shandong province Linqu County Road Su Dongcheng Development Zone, covers an area of 33350 square meters, construction area of 16000 square meters, including preparation workshop, assembly workshop, assembly workshop, machining workshop, molding workshop, casting workshop, heat treatment workshop, electrical assembly workshop, a total of eight workshops, a total of a staff of 276 people, engineering design personnel 62 people. The annual output of various cast (spray) pill cleaning machine more than 600 sets; molding sand handling and sand regeneration complete production line 40; various types of shot blasting machine more than 5200 units, special cast iron wear-resistant parts 1100 tons; 600 tons of gray iron ductile iron. It is an industrial entity which integrates development, development, design, production and management. It has formed a professional manufacturer of metal surface cleaning, complete set of equipment for casting machinery and related accessories production.
It is a member of the enterprise management association of China's machinery industry and the "high-tech enterprise" at the provincial level.
Main product:
Series caterpillar shot blasting machine
Series hook type shot blasting machine
Series rotary table shot cleaning machine
Series roller ball cleaning machine
Series trolley passing ball cleaning machine
Series of suspending chain continuous type, hanging chain step type, suspension chain set Throwing Shot cleaning machine.
Series stepping electric hoist ring rail type shot blasting machine
Series steel pipe inner wall and outer wall blasting cleaning machine
Molding complete water production line with resin sand and water glass sand
Complete water production line for recycling of old sand
Sandblasting room, sandblasting machine
Various types of high efficiency Shot Peen
Low chromium, medium chromium, high chromium and ZGMn13 special wear resistant cast iron for all kinds of casting machinery and mining machinery; cast steel, ball cast iron and gray cast iron fittings.
Various environmental type cyclone type, cloth bag type, filter cartridge type dust remover.
And to undertake the design, production, transformation and overhaul of the foundry machinery.
Application:
It is suitable for machinery, auto parts, metal products, decoration parts, household appliances, furniture and other industries. Widely used in the current cleaning equipment of shot blasting, because of the reasonable design, convenient maintenance and low cost, it is highly recommended by the broad masses of customers.
Q: Are yo tu arading company or a manufacturer?
A: We are factories.
Q: Are yo tu arading company or a manufacturer?
A: We are factories.
Q: What are your terms of payment?
A: Pay 100% down payment < 10000USD > = 10000USD, 30% T / T in advance, sbalance Pre shipment
Q: What's your pre sale service?
A: 1. Advisory support
2. Technical solutions and quotations
3. Visit the customer's factory and negotiate.
4.customers visit our factory and check the production.
Q: How long is the feedback of your company after sale?
A: In 0-24 hours
